MMC groove for card removal
Thumb
screw
Insert card face up,
this way
Memory card compartment with a 16 MB MMC card installed.
To remove an MMC
1.Open the card compartment door by unscrewing the thumb screw. The screw should only be finger tight. If it was
2.Just press a finger against the label of the MMC and drag it from the slot.
3.Close the compartment door and fasten the thumb screw finger tight.
To add an MMC or SD Card
1.Open the card compartment door.
2.Grasp the bottom of the MMC and push the top of the card into the slot. Once the card is started, use your fingernails to slide it the rest of the way to the left, until it is firmly seated in the slot.
3.Close the compartment door and fasten the thumb screw finger tight.
Other Accessories
Other accessories include MMC cards, MMC card readers and MapCre- ate™ 6 custom mapping software for your computer. MMC card readers are available in USB and parallel port versions.
If these accessories are not available from your dealer, see the acces- sory ordering information on the inside back cover of this manual.
20
