See the diagrams on the following page for general wiring connections. Read your other product’s owner’s manual for more wiring information.
NMEA Wiring
To exchange NMEA data, the IntelliMap 500C has one NMEA 0183 version 2.0 communication port. Com port one (Com-1) can be used to receive NMEA format GPS data. The com port can also transmit NMEA format GPS data to another device.
The data cable contains three wires. Com-1 uses the yellow wire to transmit, the orange wire to receive and the shield wire for signal ground.
| Orange (Receive) | NMEA Transmit |
Com-1 to | | | |
| | |
IntelliMap 500C Shield (Ground) | | Ground |
| | | |
Com-1 wiring to receive NMEA position information
from some other GPS receiver.
| Yellow (Transmit) | NMEA Receive |
| | | |
Com-1 to | | | |
IntelliMap 500C | Shield (Ground) | | Ground |
| | | |
Com-1 wiring to transmit NMEA position information
to another NMEA-compatible device.
Mounting the Unit: Bracket, In-Dash or Portable
You can install the IntelliMap 500C on the top of a dash with the sup- plied gimbal bracket. It can also be installed in the dash or mounted on a portable power supply.
If you use the supplied bracket, you may be interested in an optional R-A-Mbracket mounting system. This converts the unit's gimbal bracket to a swivel mount, which can be used on the dash or overhead mounting positions. R-A-M offers permanent mounts and temporary mounts suitable for many vehicle types. See your Eagle dealer or visit the LEI web site (www.lei-extras.com) for the latest options; accessory ordering information is on the inside back cover of this manual. For a complete look at the many mounting options, visit the RAM web site at www.ram-mount.com.
