Eagle Electronics 502cDF manual Set a Waypoint, To create and save a Waypoint

Set a Waypoint

A waypoint is an electronic address based on the latitude and longitude of a position on the earth. It represents a location, spot, or destination that can be stored in memory, then recalled and used later on for navi- gation purposes.

You can create a waypoint at the cursor position on the map, or at your current position while you are navigating. You can create a waypoint at any location by manually entering the position's latitude and longitude. You can copy waypoints from your unit to your personal computer with MapCreate software. When you want to repeat a trip, these archived waypoints can be reloaded into your GPS unit.

To create and save a Waypoint:

These first two techniques use the Quick Save method, the fastest and easiest way to create a waypoint.

Create Waypoint at Current Position

While you are traveling, press WPTWPT. The waypoint is saved and automatically given a name with a sequential number, such as way- point 003. The waypoint symbol and number appear on the map.

NOTE:

The Quick Save method uses the default waypoint symbol until you edit an existing waypoint and change its symbol After you have changed a waypoint symbol, the unit will remember the one you chose and use it the next time you quick save a waypoint. To revert to the default symbol, edit a waypoint and choose the original sym- bol or use the Reset Options command.

103