Eagle Electronics 502cDF manual To get to the GPS Simulator

ENTEXIT to get back to the main page display where the data option you selected is displayed in the selected digital data box. You can select another data box to modify or press EXIT to return to normal operation. A Page digital data boxes can show a limited number of boxes. You can not turn them off or add more data boxes.

GPS Simulator

The GPS simulator lets you use the unit as if you were outdoors navi- gating somewhere. It's a great way to practice using your unit. You can set the starting location by entering latitude/longitude (Starting Posi- tion) or from a stored waypoint, map place or POI location (CHOOSE START command). You can steer your position and change speed on the map by using the arrow keys (STEER WITH ARROWS command) or by setting the track and speed in the dialog boxes provided on the simulator menu screen.

To get to the GPS Simulator:

1.Press MENUMENU↓ to GPS SETUPENT.

2.Press ↓ to GPS SIMULATORENT. The GPS Simulator Menu appears.

GPS Setup Menu (left). GPS Simulator menu (center).

Map Page showing Track and Speed steering arrow indicators (right).

Make the desired settings, then turn on the simulator by highlighting the GPS SIMULATOR ON box and pressing ENT key. Press EXIT repeatedly to get back to the main page display. A message and tone appear peri- odically, warning you that the simulator is on. To turn the simulator off, repeat the above steps or turn off the unit.

While in simulator mode, you can press EXIT to clear the steering and speed boxes from the screen while continuing the simulation. This will allow you to use the map cursor during a simulation. To turn steering and speed boxes back on again, return to the GPS Simulator menu, se- lect the STEER WITH ARROWS command and press ENT. Press EXIT repeat- edly to return to the main page display.

138