Eagle Electronics 502cDF manual Depth Cursor, Depth Range Automatic, Depth Range Manual

Depth Cursor

The depth cursor consists of a horizontal line with a digital depth box on the right side. The numbers inside the box show the depth of the cursor.

The cursor can be moved to any location on the screen, letting you pin- point the depth of a target.

1.From the Sonar Page, press MENU↓ to DEPTH CURSORENT.

2.The depth cursor appears. Press ↓ ↑ adjust cursor line depth.

3.To clear the depth cursor, press EXIT.

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically placed in the lower half of the screen. This is called Auto Ranging and is part of the automatic function. However, depending upon the bottom depth and the current range, you can change the range to a different depth. To do this:

1.From the Sonar Page, press MENU↓ to DEPTH RANGEENT.

2.The Depth Range Control Scale appears. Press ↑ ↓ to select a differ- ent depth range. A blue bar highlights the selected range. Range num- bers in light blue cannot be selected.

3.When the new range is selected, press EXIT to clear the menu.

Sonar Page with Depth Range selected (left).

The Depth Range Control Scale (right).

Depth Range - Manual

You have complete control over the range when the unit is in the man- ual mode. There are 16 depth ranges, from 5 to 4,000 feet.

59