Eagle Electronics 502cDF manual Find Interstate Highway Exits

NOTE:

Since the Go To waypoint command is highlighted, you can navi- gate to the selected POI by pressing ENTEXIT.

Find Interstate Highway Exits

1.From the Map Page, press MENU↓ to HIGHWAY EXITSENT, which calls up the Find Exit menu.

Find Highway Exits command (left) and Find Exit menu (right).

2.First, select a highway name by pressing ENT, which calls up the

Find By Name menu. There are two highway search options: A. You can spell out the highway name in the top selection box. Press ↑ ↓ to change the first letter, then press → to move the cursor to the next let-

ter and repeat until the name is correct, then press ENTENT. B. Jump down to the lower selection list by pressing ENT, then press ↓ ↑ to select a highway from the list, then press ENT.

Find By Name menu (left). Find Exit menu with exit selected (right).

165