Eagle Electronics 502cDF manual Trails, Delete a Trail, MENUMENU↓ to

Figure 1. Figure 2.

Fig. 1 shows the Navigation Page at the start of a route, heading

straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to the northeast.

Figure 3. Figure 4.

In Fig. 3 the traveler has turned northeast on his new course and is heading straight for Wpt 2, which is 0.27 miles away. Fig. 4 shows route navigation on the Map Page. In this figure, the traveler has reached Wpt 2 and is starting on the leg between Wpts 2 and 3.

Trails

Delete a Trail
This	is the command	used to erase	or	delete a trail:
Press	MENUMENU↓ to	MY TRAILSENT↓ to	trail	nameENT↓ to

DELETE TRAILENT← to YESENT.

125