Eagle Electronics 502cDF manual Power/lights on and off

4.ARROW KEYS – These keys are used to navigate through the menus, make menu selections, move the map cursor and sonar chart cursor and enter data.

5.ENT/ICONS – The Enter key allows you to save data, accept values and execute commands. It is also used to create event marker icons.

6.EXIT – The Exit key lets you return to the previous screen, clear data or close a menu.

7.WPT – The Waypoint key is used to save and recall waypoints, search for waypoints and access the waypoint list. It also launches the Point-of-Interest (POI) search menus and is involved in some naviga- tion functions.

8.ZOUT – This key lets you zoom out the screen. On the Sonar Page, it allows you to see the entire water column from surface to bottom. On the Map Page, it lets you see a larger geographic area, but with less detail.

9.ZIN – This key lets you zoom in the screen. On the Sonar Page, it enlarges fish signals and bottom detail. On the Map Page, it lets you see greater detail in a smaller geographic area.

Power/lights on and off

To turn on the unit, press PWR. As the unit powers up, the Map Page is displayed first. (To switch to another page, press PAGES← → to Page NameEXIT.)

To turn on the backlight, press PWR again. The unit has three backlight levels. Repeatedly pressing PWR will cycle through the backlight set- tings and turn off the backlight.

Turn off the unit by pressing and holding the PWR key for 3 seconds.

Main Menu

The unit has a Main Menu, which contains function and setup com- mands. The instructions in this section will deal only with functions, the basic commands that make the unit do something. The GPS will work fine for this with the factory default settings. If you want to learn about various options, see Sec. 8, System Setup and GPS Setup Options.

You can access the Main Menu from any of the four Page screens by pressing MENUMENU. To clear the menu screen and return to the main page display, press EXIT.

86