Eagle Electronics 502cDF manual Sonar Simulator, Map With Sonar Split Screen

Map With Sonar Split Screen

There is a page mode that splits the screen in half, with sonar on one side and mapping on the other. It can be found on the Pages Menu un- der the Map Page category.

The Pages Menu with the Map option list (left). Active Map is listed at the top of the map page. Map with Sonar split screen (right). Sonar is the active page, denoted by the blue bar at the top of the page.

When this screen is displayed, you can switch back and forth between the two windows by activating the sonar or map window. To do this, press PAGESPAGES. "Active Map" will appear at the top of the map page when it is activated. Press PAGESPAGES again and the bar at the top of the sonar page turns blue.

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on the water. All sonar features and functions are useable. To use the simulator:

1.From the Sonar Page, press MENUMENU↓ to SONAR SETUPENT↓ to SONAR SIMULATORENTENTEXIT. Repeat these steps to turn it off.

NOTE:

If you turn on your unit before attaching a transducer, it may enter a demo mode. The words demo mode flash on the bottom of the screen and a sonar chart plays much like the simulator. Unlike the simulator, the demo mode is for demonstration only and will auto- matically stop as soon as you turn on the unit with a transducer at- tached.

76