Eagle Electronics 502cDF manual Ping Speed & HyperScroll, To change displayed data font size

3.The data begins to flash on your screen. Use ← →, ↑ ↓ to move the data to a new location on the screen.

4.When satisfied, press EXITEXIT.

NOTE:

The Customize command and the Overlay Data command both use the same information categories. The difference between the two commands is that Customize only changes data in digital data boxes. The Overlay Data command changes information floating freely on the screen.

To change displayed data font size:

1.Press MENU↓ to OVERLAY DATAENT.

2.Press ↓ ↑ to desired data type, then press ← → to adjust data size. The selected data type will be displayed in the new size.

To change the font size of another data type, repeat Step 2.

3.After the desired changes are made, end the command and return to the previous page by pressing EXIT.

Steering arrow

Map Page showing boat cruising Puget Sound, Washington, with Over- lay Data turned on (left). This example shows Depth, Ground Speed and the Steering Arrow. The second figure (right) shows Depth, Ground Speed and the boat's track.

NOTE:

Some data types can be displayed in only one font size. If that is the case, the Data Size box will not be displayed for that data type.

Ping Speed & HyperScroll

Ping Speed controls the rate at which the unit broadcast sonar sound waves — pings — into the water. The unit has a default ping speed of

67