Eagle Electronics 502cDF manual Navigate a Route in Reverse

Waypoint will delete the waypoint from the route. View Waypoint will show you where the selected waypoint is on the map.

NOTE:

When adding waypoints to a route, the inserted waypoints will ap- pear in the route in front of the waypoint you have selected. To in- sert waypoints at the end of the route, select (ROUTE END) before adding them.

Navigate a Route

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.

Route Planning command on Main Menu (left). Routes menu (center).

Edit Route menu (right). Navigate Route command is selected.

2.Press ↓ to select route nameENT, then use the arrow keys to select NAVIGATE ROUTE from the action window and press ENT.

3.Upon arrival at your destination, cancel navigation by pressing

MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

The following figures show what the Navigation Page and Map Page look like while navigating a route.

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the beginning waypoint:

1.From the NAVIGATION PAGE, press MENUENT or from the MAP PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.

2.Press ↓ to select route nameENT. Use the arrow keys to select REVERSE ROUTE from the action windowENT← to NAVIGATE ROUTEENT.

3.Upon arrival at your destination, cancel navigation:

press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.

124