Eagle Electronics 502cDF manual FasTrack, Fish I.D., To switch to Manual Depth Range

Models: 502cDF

1 196
Download 196 pages 24.21 Kb
Page 68
Image 68

To switch to Manual Depth Range:

1.Turn off automatic depth range. From the Sonar Page, press MENU

to AUTO DEPTH RANGEENT.

2.Press ↑ to DEPTH RANGEENT and the Depth Range Control Scale appears.

3.Press ↓ ↑ to select a different depth range. A horizontal blue bar highlights the selected range.

4.When the new range is selected, press EXIT.

To turn Auto Depth Range on again repeat Step 1.

NOTE:

The sonar's depth capability depends on the transducer installa- tion, water and bottom conditions, and other factors.

FasTrack

This feature automatically converts all echoes to short horizontal lines on the display's far right side. The graph on the rest of the screen con- tinues to operate normally. FasTrack gives you a rapid update of condi- tions directly under the boat. This makes it useful for ice fishing, or when you're fishing at anchor. When the boat is not moving, fish sig- nals are long, drawn out lines on a normal chart display. FasTrack con- verts the graph to a vertical bar graph that, with practice, makes a use- ful addition to fishing at a stationary location.

Surface clutter

Fish arches

Structure

In FasTrack, fish arches show as horizontal bars.

Bottom signal

 

ColorLine

 

 

FasTrack

 

Sonar Page showing FasTrack.

bar graph

Fish I.D.

The Fish I.D. feature identifies targets that meet certain conditions as fish. The microcomputer analyzes all echoes and eliminates surface clutter, thermoclines, and other signals that are undesirable. In most instances, remaining targets are fish.

60

Page 68
Image 68
Eagle Electronics 502cDF manual FasTrack, Fish I.D., To switch to Manual Depth Range