Eagle Electronics 502cDF Check MMC Files and Storage Space, Communications Port Configuration

4.When your adjustments are finished, return to the main page display by repeatedly pressing EXIT.

NOTE:

Anchor Alarm - The anchor alarm may be triggered even when you're sitting still. This typically happens when using small (less than .05 mile) anchor alarm ranges.

Arrival Alarm - If you set the arrival alarm's distance to a small number and you run a route (see the Navigate Routes segment), this unit may not show navigation data to the next waypoint, once you arrive at the first one, since you may not be able to come close enough to the first waypoint to trip the arrival alarm.

Check MMC Files and Storage Space

To check MMC Files:

Press MENUMENU↓ to BROWSE MMC FILESENT. Press ↓ to MMC CARD

INFOENT to see the free space on the card.

Main Menu (left). MMC File Browser (right).

Communications Port Configuration

The unit has one NMEA 0183 version 2.0 compatible communication port, or com port for short. The Com Port Menu, which is accessed from the System Setup Menu, allows you to configure the communications port to send or receive data to another electronic device, such as an autopilot. The com port can be used for either NMEA or SiRF Binary data transfer.

132