Eagle Electronics 502cDF manual 121

Edit Route menu (left). Edit Route Waypoints menu (right)

with Add From Map command selected.

4.Use the Zoom keys and arrow keys to move the map and cursor until the cursor is centered on the spot where you want your route to begin. (If you are starting at your current position or the current cursor posi- tion, you are already at the starting spot.)

5.Set the first route waypoint press ENT. In this example, we moved to the entrance of the cove where our boat was docked to start out route a promising fishing spot next to an oil platform. (Creating this example route is illustrated in the following figures.)

1.2.3.

Route creation sequence: Fig. 1. Set route waypoint (1) at the cove en- trance. Fig. 2. Move cursor northeast to set point (2) at channel en- trance. Fig. 3. With point (2) set, move cursor southeast to mark chan- nel exit with waypoint (3). In figures 2 and 3, notice the rubber band line extending from the previously set waypoint to the cursor. This line will become the course for the route.

121