Eagle Electronics 502cDF manual Navionics Charts, To display a Navionics chart

The height scale on the top right side of the graph changes, based upon the maximum range of the tide for that day. The MLLW line also ad- justs its position as the height scale changes.

You can look up tidal data for other dates by changing the month, day and year selection boxes. To select another date:

1.Use ← → to highlight month, day or year, then press ENT.

2.Use ↑ ↓ to select the desired month, day or year and press ENT. To clear the information screen, press EXIT.

Navionics Charts

Your unit can also display Navionics electronic charts on MMCs. Like NauticPath, Navionics charts contain tide and port service information.

NOTE:

The primary operational difference between a NauticPath chart and a Navionics chart is the way the chart data is set up for dis- play. NauticPath charts are ready for display as soon as they are inserted into the unit. Navionics charts must be inserted into the unit, then selected as a Map Choice option in the Map Data menu.

To display a Navionics chart:

1.Install the Navionics MMC in the memory card compartment and turn on the unit. (For full card install instructions, see Sec. 2.)

2.From the Map Page, press MENU↓ to MAP DATAENT↓ to MAP CHOICEENT. Select the Map Name, then press ENTEXITEXIT.

Map Choice highlighted on Map Data menu (left). Miami Navionics

chart selected from Map Choice menu (right).

150