| feature. | |
Receive Mode | Indicate the RIP version in which information must be | |
passed to the DSL device in order for it to be accepted | ||
| ||
| into its routing table. | |
Send Mode | Indicate the RIP version this interface will use when it | |
| sends its route information to other devices. | |
RIP Config Table | The RIP you have configured will be listed in the table. If | |
| you want to delete some settings, please select the | |
| settings and click “Delete Selected”. |
When you finish, click ‘Apply Changes’. You’ll see the following message displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management interface; press ‘Apply’ to save the settings made and restart the router so the settings will take effect after it reboots.
5.2.3.LAN
This page is used to configure the LAN interface of your ADSL Router. You can set IP address, subnet mask, and IGMP Snooping.
45
