| application on the LAN side. |
Remote IP Address | The source IP address from which the incoming traffic is |
| allowed. Leave blank for all. |
Public Port | The destination port number that is made open for this |
| application on the WAN side |
Interface | Select the WAN interface on which the |
| rule is to be applied. |
Current Port | If you want to remove the port forwarding settings from |
Forwarding Table | the table, select the items and then click "Delete |
| Selected". If you want remove all settings, just click |
| "Delete All" button. |
When you finish, click ‘Apply Changes’. You’ll see the following message displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management interface; press ‘Apply’ to save the settings made and restart the router so the settings will take effect after it reboots.
5.2.6.2. Port Mapping
The router provides multiple interface groups. Up to five interface groups are supported including one default group. The LAN and WAN interfaces could be included. Traffic coming from one interface of a group can only be flowed to the interfaces in the same interface group. Thus, the router can isolate traffic from group to group for some application. By default, all the interfaces (LAN and WAN)
74
