You may need to define routes if your home setup includes two or more networks or subnets, if you connect to two or more ISP services, or if you connect to a remote corporate LAN.
| Parameter | Description |
|
| Enable | Check to enable the selected route or route to be added. |
|
| Destination | The destination can be specified as the IP address of a |
|
|
| subnet or a specific host in the subnet. It can also be |
|
|
| specified as all zeros to indicate that this route should be |
|
|
| used for all destinations for which no other route is |
|
|
| defined (this is the route that creates the default |
|
|
| gateway). |
|
| Subnet Mask | The network mask of the destination subnet. The default |
|
|
| gateway uses a mask of 0.0.0.0. |
|
| Next Hop | The IP address of the next hop through which traffic will |
|
|
| flow towards the destination subnet. |
|
|
|
|
|
|
| 87 |
|
|
|
|
|
