802.1p | Select this field to mark the |
| 802.1p header of the packet that matches this |
| classification rule. Note that this 802.1p marking is |
| workable on a given PVC channel only if the VLAN tag is |
| enabled in this PVC channel. |
Precedence | Select this field to mark the IP precedence bits in the |
| packet that match this classification rule. |
TOS | The IP (Internet Protocol) uses the ToS (Type of Service) |
| field to provide an indication of the quality of service |
| desired. These parameters are to be used to guide the |
| selection of the actual service parameters when |
| transmitting an IP datagram through a particular |
| network.0 |
IP QoS Rules | This table lists the rules you have configured. Click |
| “Delete Selected” to delete the selected rules or click |
| “Delete All” to delete all the rules. |
When you finish, click ‘Apply Changes’. You’ll see the following message displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management interface; press ‘Apply’ to save the settings made and restart the router so the settings will take effect after it reboots.
71