Placement of the Projected Image Using the Keystone Correction
Place the projector at a distance from the screen that allows images to be projected onto the screen by referring to “Screen Size and Projection Distance” on page 17.
: Screen area
Note
•The aspect ratio of the projected image also shifts slightly when the “H Keystone” and “V Keystone” functions are adjusted simultaneously.
•If you cannot correct trapezoidal distortion with Keystone correction, change the placement position of the projector.
1 Project an image onto the screen. Adjust the focus until the image on the screen comes into focus. (See page 30.)
ZOOM | ZOOM/FOCUS |
FOCUS | END |
| |
|
|
2 Change the projection angle moving the projector or using the adjuster to properly project images onto the screen. (See page 31).
3 Align the edge of the screen clos- est to the projector with the image by adjusting the zoom and the adjuster. (See pages 30 and 31.)
Align
ZOOM/FOCUS
ZOOM
FOCUS
END
Align
4 Adjust the Keystone function so that the size of the projected image matches the screen size. (See page 32.)
5 Align the image on the screen by adjusting the zoom function and the adjuster.
ZOOM | ZOOM/FOCUS |
FOCUS | END |
| |
|
|
6 Adjust the focus so that the projected image is in focus at the center of the screen. (See page 30.)
33
