Image Projection
Keystone Correction
This function can be used to adjust the Keystone settings.
Note
•When the image is projected from a di- rection at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction.
1 Press 
on the remote control to enter the Keystone Correction mode.
2 Press '/" to select “H Keystone” or “V Keystone”.
Selectable | Description | |
items | ||
| ||
H Keystone | Horizontally adjusts the | |
| keystone settings. | |
|
| |
V Keystone | Vertically adjusts the keystone | |
| settings. | |
|
| |
Reset | Returns to the factory preset | |
| settings. | |
|
|
3 Press \/to move the 
mark on the selected adjustment item to the desired setting.
Note
•Straight lines and the edges of the dis- played image may appear jagged, when adjusting the Keystone setting.
•When adjusting “H Keystone” and “V Keystone” at the same time, the values of adjustable angles for each setting become smaller.
•The adjustable value of the “V Key- stone” becomes extremely small when “H Keystone” is made to be the maximum value.
•Keystone correction is disabled while the picture mode is set to “SMART STRETCH”. (See page 35.)
4 | Press | . |
| • The | |
| Correction mode will disappear. | |
KEYSTONE button
UNDO | Adjustment |
buttons ('/"/\/) | |
button |
|
Horizontal Keystone Correction
Vertical Keystone Correction
Note
•When adjusting the Keystone setting, the placement range is changed depending on the input signal type.
•Keystone correction cannot be applied to
•When Keystone correction is applied, the resolution of image can be deteriorated to some extent.
•Keystone Correction is also returned to the factory
preset settings by pressing 
on the remote con- trol.
32
