Image Projection
Selecting the Picture Mode
You can select the picture setting (Memory) directly stored in “Picture Mode” on the “Picture” menu.
Press 
on the remote control.
•Each time the button is pressed while the display is on, the picture mode changes in order of:
Memory OFF 
Memory 1
Memory 2
Memory 5
Memory 4
Memory 3
Note
•This function can also be accessed from the OSD menu (see page 44).
Switching the High Bright- ness / High Contrast Mode
This function controls the quantity of the pro- jected light and the contrast of the image.
Press 
on the remote control.
•Each time the button is pressed while the display is on, the mode is switched between “HIGH BRIGHTNESS MODE” and “HIGH CONTRAST MODE”.
Note
•This function can also be accessed from the OSD menu (see page 44).
Adjusting the Picture Aspect Ratio
This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose STRETCH, SIDE BAR, SMART STRETCH or CINEMA ZOOM image.
Press 
on the remote control.
•Each time 
is pressed, the picture mode changes as shown on the next page.
•To return to the standard image (“STRETCH”), press
while “RESIZE” is displayed on the screen.
•You can also change the picture display mode
by pressing 
on the projector.
UNDO button
RESIZE button
PICTURE MODE button
IRIS button
RESIZE button
UNDO button
34
