Eiki EIP-1500T Using the Options Menu, Checking the Lamp Life Status, Setting On-screen Display

Using the “Options” Menu

You can use the “Options” menu to enhance the usage for the projector.

Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Menu operation Page 40

Example: “Options” menu screen for INPUT 1 mode

Description of Lamp Life

Lamp usage condition			Remaining lamp life
	“Life”		100%	5%
Operated exclusively			Approx.	Approx.
in Eco mode ( )			3,000 hours	150 hours
Operated exclusively			Approx.	Approx.
in Standard mode (		)	2,000 hours	100 hours

Setting On-screen Display

This function allows you to turn off the on-screen messages that appear during input select.

Menu operation Page 40

Example: “Options” menu screen for INPUT 1 mode

Description of “OSD Display” Settings

Selectable items	Description
(ON)	All On-screen Displays are displayed.
(OFF)	INPUT/AUTO SYNC/ “An invalid button has
	been pressed.” are not displayed.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%. (See page 56.)

•The table above indicates rough estimates in the case of using only in each mode shown.

•Remaining lamp life changes within the range of

the values shown depending on the frequency at

which “Eco Mode” is switched to “” (Eco mode) and “” (Standard mode). (See page 49.)

•The lamp life may vary depending on the usage condition.

47