Eiki EIP-1500T owner manual Specifications, PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC

Specifications

Product type	DLPTM Projector
Model	EIP-1500T
Video system	PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
	DTV 480I/480P/720P/1080I
Display method	Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
DLP panel	Panel size: 0.8"
	Drive method: Digital Light Processing (DLP™)
	No. of dots: 921,600 dots (1,280 [H] ⋅ 720 [V])
Lens	1–1.5 ⋅ zoom lens, F2.0–2.5, f=21.3–31.6 mm
Projection lamp	275 W DC lamp
Video input signal	RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω
S-video input signal	terminated
	4-pin Mini DIN connector (INPUT 3)
	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Component input signal RCA Connector

(INPUT 1, 2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated

	PB (CB): 0.7 Vp-p, 75 Ω terminated
	PR (CR): 0.7 Vp-p, 75 Ω terminated
Analog RGB/Digital	29-pin DVI-I terminal
(INPUT 5/DIGITAL)	<Digital>
	Input impedance		50 Ω
	Input level	250-1000 mV
	<Analog>
	Input impedance		75 Ω
	Input level	0.7 Vp-p
	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB (CB): 0.7 Vp-p, 75 Ω terminated
	PR (CR): 0.7 Vp-p, 75 Ω terminated
	<Synchronization signal>
	• Separate sync/Composite sync
	Input level	TTL level
	Input impedance		1 KΩ
	• Green on sync
	Input level (Synchronizing input) 0.286 Vp-p
	Input impedance		75 Ω
Horizontal resolution	720 TV lines (DTV 720P input)
Pixel clock	12–80 MHz
Vertical frequency	43–75 Hz
Horizontal frequency	15–70 kHz
Computer control signal	9-pin D-sub connector (RS-232C Port)
Rated voltage	AC 100–240 V
Input current	3.65 A (When using AC 100 V)
Rated frequency	50/60 Hz
Power consumption	360 W (When using AC 100 V)
Power consumption (standby)	6 W (When using AC 100 V)
Heat dissipation	1,350 BTU/hour
Operating temperature	41°F to 95°F (+5°C to +35°C)
Storage temperature	–4°F to 140°F (–20°C to +60°C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	12 7/32" ⋅ 3 33/64" ⋅ 11 7/64" (310 (W) ⋅ 89 (H) ⋅ 282 (D) mm) (main body only)
	12 7/32" ⋅ 4 7/64" ⋅ 11 5/16" (310 (W) ⋅ 104 (H) ⋅ 287 (D) mm) (including adjustment foot
	and projecting parts)
Weight (approx.)	9.3 lbs. (4.2 kg)
Replacement parts	Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
	Video cable, Lens cap, QUICK GUIDE, Owner’s manual

As a part of policy of continuous improvement, EIKI reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

63