Picture Adjustment (“Picture” menu)
You can adjust the projector’s picture to your preferences using the “Picture” menu.
Adjusting the Image
Menu operation 
Page 38
Note
•First select “Memory
Example: “Picture” menu screen for INPUT 1 mode
Description of Adjustment Items
Selectable items | Press \ | Press |
Contrast | For less contrast | For more contrast |
Bright | For less brightness | For more brightness |
Color | For less color intensity | For more color intensity |
Tint | For making skin tones purplish | For making skin tones greenish |
Sharp | For less sharpness | For more sharpness |
Red | For weaker red | For stronger red |
Blue | For weaker blue | For stronger blue |
Note
•“Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 5 mode.
•To reset all adjustment items, select “Reset” on the “Picture” menu screen and press 
.
•“Tint” cannot be used with PAL, SECAM, PAL- M,
•“Color”, “Tint” and “Sharp” cannot be used in the DIGITAL mode.
Adjusting the Color Temperature
This function allows for selecting the desired color temperature. With the lower value selected, the projected image becomes warmer, reddish and
Menu operation 
Page 40
Example: “Picture” menu screen for INPUT 1 mode
Description of Color Temperature Settings
CLR Temp | Description | ||
5500K | The less the value is set to, the warmer, | ||
6500K | reddish, | ||
7500K |
|
| |
|
| ||
8500K |
|
| |
The more the value is set to, the cooler, | |||
9300K | |||
10500K | bluish, | ||
“CLR Temp” is fine adjusted by following the procedure below.
1 Select “CLR Temp” in the “Picture” menu on the menu screen and press 
.
•A single menu bar of “CLR Temp” is displayed.
2 Press ' or " to fine adjust the color temperature.
•With the lower value selected, the projected image becomes
•Pressing \ or changes the value of the color temperature in the sub menu.
Note
•Values on “CLR Temp” are only for general standard purposes.
42
