12. Verify the installation by entering the command pkginfo -l | grep
NAVI*.
Depending on what you installed, some of the followingmay be
displayed:
NAVIAGENT:Navisphere Disk Array Management Tool
(Agent)
NAVICLI:Navisphere Disk Array Management Tool(CLI)
NAVISCLI:Navisphere Disk Array Management Tool (CLI)
13. If you have a multihomed host (multiple NIC cards installed on
the host), create an agentID.txt file to ensurethat the agent finds
the correct NIC card.
Note: A multihomed host machine has multiple IP addresses connected to
networks;it is physically connected to multiple data links that can be on the
sameor different networks. Whenyou install Navisphere Host Agent on a
multihomed host, the host agent, by default, binds to the first NIC in the
host. If your host is multihomed, for the host agent to successfully register
withthe desired CLARiiON storage system, you need to configure the host
agenttobindtoaspecificNIC.YoudothisbysettingupanagentID.txtfile.
a. Using a text editor that does not add special formatting, create
oredit a file named agentID.txt (case sensitive) in either / (root)
or in a directory of your choice.
b. Addthe following two separate lines to the agentID.txt file,
with no special formatting:
First line: Fullyqualified hostname of the host
Second line: IP address of the HBA/NIC port that you
want Navisphere agent to use
Forexample,ifyourhostisnamedhost28 on the domain
mydomain.comand your host contains two HBAs/NICs,
HBA1/NIC1 with IP address19 2.111.222.2and HBA2/NIC2
with IP address192.111.222.3, and you want the host agent to
use NIC 2, you would configure agentID.txt as follows:
host28.mydomain.com
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 25