Running the Navisphere Server Utility
This section describeshow to start and use the server utility.
Starting the Navisphere Server Utility
Youcan run the server utility from the server or from the server
support CD.
Starting the Navisphere Server Utility on a Solaris server
1. Open a shell window.
2. Navigate to the Navispherebin directory:
/opt/Navisphere/bin
3. Run the server utility:
./naviserverutil
Starting the Navisphere Server Utility for a Solaris server on the CD
1. In the server’s drive, insert the server support CD, which shipped
with the storage system or the upgrade kit (forAX-series systems
upgrading to Navisphere Manager).
2. Navigate to the Solaris directory:
/cdrom /cdrom0/solaris
3. Run the server utility:
./naviserverutilcli
Using the Navisphere Server Utility
The Navisphere Server Utility allows you to perform the following
functions:
Updateserverinformationonthestoragesystem
Perform snapshot tasks (NavisphereExpress only)
Generate a high-availablity report(not available on Solaris servers
with iSCSI connections)
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 37