About EMC Navisphere Software
The following EMC® server-based softwareis available on the server
supportCD thatshipped with your storage system or your upgrade kit
(for AX-seriessystems upgrading to Navisphere Manager):
Navisphere®Stor age System Initialization Utility
Navisphere Host Agent
Navisphere ServerUtility
Admsnap Utility
NavisphereCommand Line Interface (CLI)

About the Navisphere Storage System Initialization Utility

For CX3-series and CX-seriesFibre Channel storage systems, use the
utility to discoverstorage systems, and set network parameters (IP
address,subnet mask, and default gateway).
Note: For CX-series storage systems, an authorized service provider must
installand run the Initialization Utility.
For AX-series storage systems, use the utility to discover storage
systems, set network parameters (IP address,subnet mask, and default
gateway), and create management user accounts. In addition, for
AX150 iSCSI storage systems, use the utility to set network parameters
for the storage system’s iSCSI data ports.
Youcan run the Navisphere Storage System Initialization Utility from
the server support CD or you can install it on a server that is connected
to the storage system. We recommendthat you install the utility on at
least one server that is connected to the storage system.
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 3