3. Viewthe paths using the echo command as follows:
#echo $PATH
#echo $MANPATH
#echo $LD_LIBRARY_PATH
What next?
Ifyouaresettingupanewserver,gotoRunningthe Navisphere Host
Agent, page 31. If you are just upgrading the host agent or CLI on an
existing system, you are finished with the upgrade.
Removing the host agent and/or CLI on a Solaris server
Note: To avoid losing site-specific information, copy the host agent
configuration file (agent.config) to a safe location before removingany
Navispheresoftware. Thefollowing steps describe how to uninstall the host
agent(and theCLI if required).
1. Log in to the server as superuser (root) and start the X Window
System if it is not started.
2. At the command linein an X Window terminal emulator, enter the
following commands:
/etc/init.d/agent stop
cd pkgrm package
where:
package is NAVIAGENTor NAVICLI (these names must be
capitalized)
3. Enter yand yto remove the program.
Note: The removal program removes only the files that were installed
fromthe installation CD. Files that the CLI creates (for example, log files)
arenot removed.
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 27