Note: The server utility runs on servers attached to CX3-series, CX-series, and
AX-seriesstorage systems. CX3model 10 systems must be running FLARE
OE03.24.010.5.xxx or later. CX3model 20 systems, CX3 model 40 systems,
and CX3 model80 systems must be running FLARE OE 03.22.xxx.5.yyy or
later. CX200, CX300-series, CX400, CX500-series,CX600, and CX700 systems
mustbe running FLAR E02.16.xxx.5.yyy or later.AX150-series systems must
be runningFLAR E02.20.xxx.5.yyy or later. AX100-seriessystems must be
runningFLARE 02.16.xxx.5.yyy or later.
About the Admsnap Utility
TheAdmsnapUtilityisanexecutableprogramthatyoucanrun
interactivelyor by a script to manage SnapView®clones and snapshots.
The Admsnap Utility resideson the servers connected to the storage
system with the SnapViewdriver installed.
Use admsnap commands to:
Scan for new storagedevices
Make storage devices inaccessibleto the server operating system
Flush cache data to disk
List currentsnap shot devices
Map and unmap to a SnapViewsession
Start and stop a SnapViewsession
6EMC CLARiiON Server Support Products for Solaris Server Installation Guide