Note: The Admsnap Utility runs on servers attached to CX3-series and
CX-series. It also runs on servers attached to AX-series storage systems that
havebeen upgraded to Navisphere Manager, that is, that have the Navisphere
Manager enabler installed. If you upgraded to Navisphere Manager and
want to manage snapshots, you must use the SnapViewsoftware and the
AdmsnapUtility. For m oreinformation on SnapView and admsnap, refer to
theNavisphere Manager help and the EMC SnapView Command Line Interfaces
Reference.
About the Navisphere CLI
The CLI complements or can be used as an alternative to Manager. It
provides acommand line interface for storage-system management,
including storage provisioning,status and configuration information
retrieval,and control. Youcan use the CLI to automate management
functionsthrough shell scripts and batch files. NavisphereCLI includes
the Secure,Classic, and Java CLI functionalities. Formore information,
refer to the EMC Navisphere Command Line Interface (CLI) Reference Guide.
Note: The Navisphere CLI can run on servers or remote management stations
that areattached to C X3-series and CX-series. It can also run on servers or
remotemanagement stations that are attached to AX100 and AX150 storage
systemsthat have been upgraded to Navisphere Manager, that is, that have the
NavisphereManager enabler installed.
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 7