Hazardous Area Oxymitter DR
Instruction Manual
Insulation surface should be lightly sprayed with water before removal to suppress airborne dust. As water evaporates during removal, additional water should be sprayed on surfaces as needed. Only enough water should be sprayed to suppress dust so that water does not run onto the floor of the work area. To aid the wetting process, a surfactant can be used.
After RCF removal is completed,
Product packaging may contain product residue. Do not reuse except to reship or return Ceramic Fiber products to the factory.
Rosemount Analytical Inc. A Division of Emerson Process Management |
