Emerson ITR Condensate Pump, Remote Temperature/ Humidity Sensors, Disconnect Switch-Locking Type

Standard Features—All Systems

4.6.1	Condensate Pump
	The condensate pump, mounted in the bottom of most units, is
	used for unit drain water only. The condensate pump is complete
	with sump, motor and pump assembly and automatic control.
	The standard model has single float. A dual-float condensate
	pump, which includes connections to unit, common alarm, unit
	shutdown and one customer N/O contact is also available.
	Table 1	Condensate pump capacity
			Capacity	Head Pressure
	Voltage	Hz	GPH (l/s)	ft. (kPa)
	200/230	50	50 (189)	10 (30)
	208/230	60	50 (189)	17 (51)
	380/415	50	200 (757)	26 (78)
	460	60	200 (757)	43 (128)
4.6.2 Remote Temperature/ Humidity Sensors
	The remote temperature/ humidity sensors permit monitoring room conditions from an external
	source. They are encased in an attractive case and are provided with a plug compatible shielded cable
	in virtually any length.
4.6.3	Disconnect Switch—Locking Type
	The locking disconnect switch, mounted in the electrical panel, is con-
	nected to the safety lock dead front panel of the system and is inter-
	locked mechanically. In this way the panel can’t be opened until the

switch is in the off position. And it complies with local codes as well as those of the NEC.

Disconnect Switch

(Locking)

8