Hardware Preparation and Installation 
6.Squeeze the lever and the latch together and hook the lower and the upper handle into the shelf rail recesses.
7.Fully insert the RTM and lock it to the shelf by pressing the two components of the lower and the upper handles together and turning the handles toward the face plate.
8.Tighten both face plate screws on the RTM.
9.Insert the front blade from the system's front into the same slot as the RTM. For a detailed instruction of the installation procedure for the front blade please refer to
As soon as the front blade is connected to the backplane, the blue hot swap LEDs of both the front blade and the RTM are illuminated permanently. This indicates that the IPMC of the front blade and the MMC of the RTM are powered up.
10.Close the handles of the front blade.
32 |
