Manuals / Emerson / Computer Equipment / Power Supply

Emerson Series 610 manual Master Menu Screen, SCC and module master menu screens

Models: Series 610

1 120

Download 120 pages 16.72 Kb

Page 32

3.2.1Master Menu Screen

Operation

Figure 12 illustrates the primary screens that you can access through the Operator Interface Display System. The liquid crystal display (LCD) screen provides a full 80 characters by 25 lines of informa- tion for easy readability. The following sections describe what these screens display and how and when to use them.

Module status information is available on the display screen, provided Control Power is ON, even when the UPS module is not operating. System status information is available on the SCC display screen and at local and remote terminals when at least one module is on-line or when the bypass source is available.

The screen will automatically display the Monitor/Mimic during normal operation. The System con- figuration screen will be displayed during start-up and whenever a system reset is required.

If a module display screen is blank, either power is not available, the Rectifier Input (RIB) circuit breaker (external to the UPS module) is open or the Control Power switch is OFF. If power is avail- able and a display is blank, contact Liebert Global Services (1-800-LIEBERT). Note that status infor- mation may be available at local and remote terminals. Use control touch pads at the SCC to manually transfer the critical load to the bypass line if the SCC display goes blank while load is on UPS (a very unlikely event).

3.2.1Master Menu Screen

The Master Menu contains the primary menu selections that monitor and control the operation of the UPS.

Figure 13 SCC and module master menu screens

			UP : CURSOR UP

			DOWN : CURSOR DOWN
© 1989-2003
			SELECT : CHOOSE
MASTER MENU



MONITOR/MIMIC DISPLAY		START-UP PROCEDURES
STATUS REPORTS		SHUTDOWN PROCEDURES
SYSTEM CONFIGURATION		METER CALIBRATION
LIMIT SETTINGS		BATTERY EQUALIZE
LOAD TRANSFER PROCEDURES		CUSTOMER ALARM DEFINITIONS

SCC Master Menu

			UP : CURSOR UP

			DOWN : CURSOR DOWN
© 1989-2003
			SELECT : CHOOSE
MASTER MENU



MONITOR/MIMIC DISPLAY		START-UP PROCEDURES
WALK-IN DISPLAY		SHUTDOWN PROCEDURES
STATUS REPORTS		BATTERY TIME
SYSTEM CONFIGURATION		METER CALIBRATION
LIMIT SETTINGS		BATTERY EQUALIZE

Module Master Menu

26

Image 32

Emerson Series 610 manual Master Menu Screen, SCC and module master menu screens

Contents

For Business-Critical Continuity Liebert Series 610 UPSAC Power BATTERY CABINET PRECAUTIONS CONTACTING LIEBERT FOR SUPPORTTABLE OF CONTENTS 4.0 MAINTENANCE 5.0 SPECIFICATIONSFIGURES TABLES IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONSFigure 1 Multi-Module UPS, 100-500kVA 1.1 System Description1.0 INTRODUCTION Figure 2 Multi-Module UPS, 500-750kVA 1.2 Reliability Types of System Control Cabinets SCCsDesigned for Success Figure 3 System Control Cabinets1.3 Safety Precautions 1.4.2 Input Power Failure1.4 Modes of Operation Other Factors to Consider1.4.7 Maintenance Bypass 1.4.8 Off-Battery1.4.3 Recharge 1.4.4 OverloadIntroduction 1. Battery 1.6 Options2. Battery Racks or Cabinets 2.1.1 System Control Cabinet 2.1 General Component Descriptions2.0 THEORY OF OPERATION 2.1.2 UPS Module 2.1.3 Battery PlantFigure 6 UPS module block diagram Software 2.2 Detailed Component Descriptions2.2.1 Controls Hardware Input Power Factor 2.2.2 Rectifier/ChargerOperation Input Circuit Breaker2.2.3 Battery Charging Circuit Battery DisconnectBattery Charge Current Limiting Battery Equalize Charge CircuitNon-Linear Load Characteristics Unbalanced Load Characteristics2.2.4 Inverter OperationFigure 7 System Control Cabinet block diagram 2.2.5 Static BypassFuse Protection Shorted SCR MonitoringLoad Transfers Static Switch IsolationPulsed Parallel Operation Transfer and Retransfer Conditions 1. Automatic Transfers to Bypass2. Manual Transfers 3. Transfer Inhibited2.2.6 Redundant Mode 6. Retransfer Inhibited3.0 OPERATION Features3.1 Display Screen and Operator Controls Figure 8 Typical operator controls Typical operator controlsOperation 500kVAOperation Figure 9 Operator controls, typical SCCT System Control CabinetTypical SCCT System Control Cabinet operator controls Operation Figure 10 Liebert Series 610 UPS and SCC operator control panelsLiebert Series 610 UPS and SCC operator control panels Operation Figure 11 Switches behind SCC control panel doorLiebert Series 610 UPS and SCC operator control panels 3.2 Menu Tree Navigation Figure 12 Menu tree3.2.1 Master Menu Screen Figure 13 SCC and module master menu screensFrom any primary screen accessed directly from the Master Menu, pushing the Select pad once will return you to the Master Menu. From any secondary screen, pushing the Select pad twice will return you to the Master Menu 3.2.2 SCC Monitor/Mimic Display Screen Input Metering DisplaysOutput Metering Displays Figure 14 SCC Monitor/Mimic display screenStatus/Alarm Message Areas Item 7 - Alarm MessagesItem 5 - Module Status Messages Item 6 - System Status MessagesBATTERY VOLTS AMPS 15 CHARG 3.2.3 Module Monitor/Mimic Display ScreenInput Metering Displays Output Metering DisplaysAlarm Messages Item 5 - Alarm MessagesFigure 16 Monitor/Mimic display example Normal power flow OperationSCC Display Module DisplayFigure 17 Monitor/Mimic display example Utility fail Operation325A 325A 325A Operation270 kVA / 217 kW Operation MOD 1 ON LINE MVODLTS2 OFF540 LINE SUM ALM MODAMPS3 75ON15 CHARGLINEA B C 953A3780A 953A3780A 953A378A0A 50.0Hz 5060..00HzOperation MODAMPS3 75OFFCHARGLINE SUM ALM3.2.4 Walk-In Display Screen Figure 21 Walk-in display screen during start-up3.2.5 Status Reports Screens Present StatusEach of the four Status Reports can be displayed on a remote terminal Refer to 3.2.15 - Communication InterfacesEvent History Figure 23 Present status report screens, SCC above and moduleFigure 24 Event history report screen OperationHistory Status Figure 25 History status report screensAlarm in Module Table 5 Alarm conditions that freeze history data gatheringAlarm in SCC Figure 26 Battery cycle monitor screen System StatusFigure 27 Battery cycle monitoring summary screen Battery Cycle Monitoring SummaryEvent Date3.2.6 System Configuration Screens Figure 29 SCC system configuration screenDate Figure 30 Date screenTime Figure 31 Time screenFigure 32 Auto dial setting screen Auto DialModem Baud Rate Maximum Auto-Retransfer AttemptsFigure 33 Modem baud rate Figure 34 Maximum auto-retransfer attempts screenSystem Current Rating Language SelectionSystem Options Figure 35 SCC system options screenContinuous Duty Static Switch Optional Figure 37 Battery test screen-MMU onlyFigure 38 Battery test results screen SCC and module remote monitor indications Figure 39 Monitor/Mimic display example Continuous Duty Static SwitchRemote Monitor 3.2.7 Alarm Limit Settings Screen Figure 40 Module alarm limit settings screenBattery Float Voltage Temperature Limit Setting Optional3.2.8 Load Transfer Procedures Screen Figure 41 Load transfer procedures screen3.2.9 Start-Up Procedures Screen Figure 42 SCC start- up procedures screen3.2.10 Shutdown Procedures Screen Figure 43 Module start- up procedures screensFigure 44 SCC shutdown procedures screen Figure 45 Module shutdown procedures screen3.2.11 Battery Time Screen Module Only Figure 46 Battery time screen 15 minute dischargeFigure 47 Battery time screen 45-minute discharge Figure 48 Accuracy range of values for calculated battery timesRemaining TimeBattery age Excessive battery discharge/recharge cycles Loose electrical connections Ambient temperature extremesDirty battery jar covers Bad or weak cells Low acid levels in flooded cells3.2.12 Meter Calibration Screen Figure 49 Meter calibration screen3.2.13 Battery Equalize Screen Figure 50 Battery equalize screenSystem Status Messages 3.2.14 Alarm and Status Messages Module Status MessagesFigure 51 SCC status and alarm message areas Load Block Messages Alarm MessagesTable 8 Abbreviations used in alarm messages Alarm messages - meaning and corrective action OperationAlarm messages - meaning and corrective action continued OperationOperation Alarm messages - meaning and corrective action continuedRefer to 3.2.14 - Alarm and Status Messages Determine the cause of the emergency condition and correct it if possible Alarm messages - meaning and corrective action continuedOperation Table 10 Alarm messages - summary Alarm MessageOperation Special Functions3.2.15 Communication Interfaces Worldwide ReportingAuto-Dial Requesting InformationSite Reporting SiteScan or SNMP Local Reporting to a TerminalLocal Reporting to a Monitor Separate / Simultaneous Outputs Table 11 Liebert Series 610 terminal commandsRemote Monitor Panel 3.3 Modes of Operation Table 12 Circuit breaker abbreviationsAbbreviation Circuit Breaker3.3.1 Load on Bypass 3.3.2 OK to TransferSCCT Figure 52 Load on bypass, UPS not availableSCCT SCCTFigure 53 Load on bypass, UPS available Figure 54 Load on UPS, bypass availableFigure 55 Momentary overload, pulsed static bypass switch SCCT3.3.3 Momentary Overloads SCCTSCCT 3.3.4 Input Power Failure-Load on BatteryFigure 56 Input power fail-load on battery Figure 57 One module off-line, load on UPS 3.3.5 One Module Off-LineSCCT SCCT 3.3.6 Off BatteryFigure 58 Load on UPS-battery not available Figure 59 Emergency modules off 3.3.7 Emergency Modules OffSCCT SCCT 3.3.8 Remote Emergency Power OffFigure 60 Emergency power off 3.3.10 Maintenance Bypass 3.3.9 System ShutdownSCCT Figure 61 System shutdownFigure 62 Load on maintenance bypass, two breakers Figure 63 Load on maintenance bypass, three breakersSCCT SCCT3.4 Manual Procedures 3.4.1 SCC Start-Up ProcedureStep 1. Before you apply power to the UPS modules, determine the position of the following circuit breakers and switches 5. Set the Static Switch Disconnects to ON closed Figure 64 SCC start-up procedures screen 3.4.2 UPS Module Start-Up Figure 65 Module start-up procedures screen The Battery block in the Monitor/Mimic Display indicates the battery voltage and charge current 3.4.3 Load Transfer Procedures Figure 66 Load transfer procedures screenIf the load is on the UPS System Bypass 3.4.4 Maintenance Bypass Load TransfersIf the load is on Maintenance Bypass 3.4.5 Shutdown Procedures System Shutdown Procedure Figure 67 SCC shutdown procedures screenModule Shutdown Procedure Figure 68 Module shutdown procedures screenLocal Emergency Modules Off LEMO Remote Emergency Power Off REPO3.5 Automatic Operations Figure 69 Current-versus-time curves of module overload capacity 3.5.1 Overloads Without Transfer3.5.2 Automatic Transfers to Bypass 3.5.5 Automatic Emergency Modules Off 3.5.3 Automatic Retransfers to UPS3.5.4 Automatic Module Off-Line 4.1 Safety Precautions 4.0 MAINTENANCE4.2 Liebert Global Services Maintenance Agreements The Signature ProgramProfessional Start-Up Training4.3.2 Air Filters 4.3 Routine Maintenance4.3.1 Record Log 4.3.3 Limited Life Components 4.4 Battery Maintenance 4.4.1 Battery Safety PrecautionsBattery Safety Precautions In French Per CSA Requirements AVERTISSEMENTInstructions Importantes Concernant La Sécurité Conserver Ces InstructionsMatching Battery Cabinets Optional Battery Voltage VDCNumber of Cells NominalRack-Mounted Batteries Table 13 Battery retorque valuesTable 14 Battery voltage record 4.4.2 Torque Requirements Table 15 Torque specifications unless otherwise labeled4.5 Detection of Trouble 4.6 Reporting a Problem 4.9 Upstream Feeder Circuit Breaker Setting Inspections4.7 Corrective Actions 4.8 Recommended Test Equipment5.1 Rating 5.0 SPECIFICATIONSFigure 70 Output power envelope for 0.8 and 0.9 pf rated units 5.2 Environmental Conditions Table 17 Specifications applicable to environmentSpecifications 5.3 Adjustments 5.4 Battery OperationSystem overload capacity depends on 5.5 Electrical SpecificationsSpecifications Specifications Page Ensuring The High Availability Of Mission-Critical Data And ApplicationsTechnical Support / Service reduced capital equipment and operating costs