Emerson Series 610 manual Battery cycle monitoring summary screen

Operation

The Summary screen (Figure 27) shows Total Number of Discharge Cycles, Accumulated Battery Time, Accumulated Battery Amp Hours, Accumulated Battery Kilowatt Hours and Battery Tempera- ture. During a battery discharge event, the screen changes to show information about the present dis- charge cycle. The screen displays Active Cycle Time in place of Accumulated Battery Time and shows Active Battery AH and Active Battery kWH instead of accumulated values.

Figure 27 Battery cycle monitoring summary screen

© 1989-2003

SELECT : EXIT

Battery Cycle Monitoring Summary
Total No. of Cycles	7
Accumulated Battery Time	15 min. 32 sec.
Accumulated Battery AH	71
Accumulated Battery KWH	34
Battery Temperature	25°C / 77°F

Figure 28 shows a typical detail screen for the 91-240 Seconds Discharge category. This information can be collected remotely, through the optional communications board and modem, by a remote termi- nal or a personal computer equipped with a modem and communications program. See 3.2.15 - Com- munication Interfaces for more information.

NOTE

This information is applicable to systems with separate batteries for each module. If the modules share a common battery, select one module to do the monitoring and disregard the other(s).

Figure 28 Typical data on discharge cycles of 91 to 240 seconds duration during the recording period

						UP : CURSOR UP
			© 1989-2003			DOWN : CURSOR DOWN
Total	91-240 se c. Cycl 5					SELECT :	CHOOSE
	EXIT
Event	Date	Time	Duration	Min. Volt	Max. Amp	Start KW Start Temp
15	4/12/95	10:31	235	477	110	70	68
12	3/25/95	20:21	98	479	97	37	65
9	3/13/95	7:35	139	467	173	69	67
5	2/07/95	17:22	199	478	95	40	70
2	11/24/94	12:33	95	477	83	39	69

43