Enterasys Networks ANG-1000 manual Setting Up the LAN, Click the LAN Setup menu option

Chapter 3

Configuring the ANG-1000 with Aurorean Web Config

Setting Up the LAN

LAN configuration of the Trusted side of the ANG-1000 involves choosing either to manually set an IP address and subnet for the ANG-1000 or dynamically assigning its IP address via your network’s DHCP server.

Begin LAN Setup by performing the following steps:

1Click the LAN Setup menu option.

The LAN Setup window appears as shown in Figure 22.

	Aurorean Network Gateway 1000
Help	LAN Setup
VPN	LAN Address Assignment:
VPN Status	DHCP assigned IP address
VPN Setup	Manual assigned IP address
Connectivity Setup
	IP address:	192	168	1	1
Internet Setup
LAN Setup	Subnet:	255	255	255	0
Firewall Setup		DHCP server enabled
ANG-1000 System		Starting IP address:
Set Password		192	168	1	100
Device Status		Number of IP addresses:
Firmware Update		100
Advanced Utilities
		Enable DNS proxy
Links		Enable WINS proxy

Config File Editor Apply

Figure 22 LAN Setup Window

2Do one of the following:

H Click the DHCP assigned IP address radio button and perform the following steps:

–Click Apply.

Aurorean Network Gateway-1000 User’s Guide 23