Enterasys Networks ANG-1000 manual Pin Assignments, Link 1 Trusted, Link 2 External, Pin Signal

C

Pin Assignments

This appendix describes pin assignments for the Ethernet connectors on the back of the ANG-1000. Because ANG-1000 servers ship with all the cables required, this information is only necessary if you need to purchase or fabricate a replacement cable.

ANG-1000 servers are equipped with Ethernet ports located at the rear of the chassis, supporting full-duplex 10Base-T transmission.

Both port types conform to IEEE 802.3 standards with 8-pin modular RJ-45 connectors. Figure 2 shows the pin assignments for ANG-1000 server Ethernet ports.

Pin 8

Link 1 (TRUSTED)

Pin 8

Link 2 (EXTERNAL)

	Pin 1	Pin	Signal
		1	Transmit +
		2	Transmit -
		3	Receive +
Pin 1		4	Return
		5	Return
		6	Receive -
		7	Return
		8	Return

Figure 1

Figure 2 Ethernet Port Pin Assignments

Aurorean Network Gateway-1000 User’s Guide 47