Epson 1000, 1500 START UP ERROR, Press 4 to exit this submenu without saving a macro, SelecType, e CAUTION:

Select a macro number for your setting by pressingA or v . Then press F to save the current SelecType Level 1 settings into the macro. Next use the PowerOn MACRO option, described later in this MACRO section, to choose the same number as chosen in SAVE MACRO. These settings will be in effect each time you turn the printer on.

Press 4 to exit this submenu without saving a macro.e CAUTION:

Do not turn off the printer while it is saving the macro. If you do, you may see a START UP ERROR message the next time you turn the printer on.

You can save up to four different settings for each emulation except PostScript.

LOAD MACRO-Use this option to load one of the macros you created using the SAVE MACRO option. The factory setting is 1. When you press b , the following appears on the display:

Menu/submenu Available options

L O A D M A C R O +l b E X E 0 t o 4

Press A or v tochoosethe numberof themacroyouwantto use. Then press b to load the selected macro. Whenever you selectmacro0,allLevel1settingsreturntotheirfactory settings. Press 4 to exit this submenu without loading a macro.

Note:

You can create customized Level 1 settings (macros) and save them in the printer. The printer can memorize up to four series of macros for each emulation. If you change the Level 1 settings and save them to one of the macros in advance, you can later use your customized macros whenever you load the corresponding macro number.

SelecType 4-19