Epson 1000, 1500 Options, See, Quick, Reference Guide

Note:

Once you set an option, the setting remains in effect until you change it again or turn off the printer. If you want a setting to remain in effect even when you turn the printer off and on, you can use the SYSTEM CONFIG. option to save Level 1 settings. See ‘MACRO” later in this chapter. Level 2 settings are saved automatically when you exit Level 2.

Options

This section lists all the menus and options available. Most menus and options are the same in the different printer emulations. However, some have a different function for each emulation. These menus are listed in the appendix that describes the printer emulation. See the Quick Reference card at the back of this Reference Guide for a map of all SelecType menus and options.

When you enter SelecType Level 1, you see one of these options:

INPUT	STATUS SHEET
PAGE SIZE	FONT SAMPLE
COPIES	SUB CONFIG.
ORIENT.	SYSTEM CONFIG.
FONT

When you enter SelecType Level 2, you see one of these options:

FEATURE PRINT	LANG.
EMULATION	DENSITY
INTERFACE	TONER
RX-BUFFER SIZE	VERSION
USER	PAGE COUNTER
CH TIMEOUT	RITech
AUTO CONT.	STANDBY

SelecType 4-7