Epson 1000, 1500 RITech, RX-BUFFERSIZE, telling you to add memory

RITech

This Level 2 option, Resolution Improvement Technology (RITech), is available only with a printer equipped with HPIII emulation (3/P/Si). RITech produces smoother and crisper lines, text, and graphics. You will probably not have to change the factory setting, which is MEDIUM. If you change the RITech setting, you can check the print quality by printing a sample status sheet. See Chapter 1 for full information on RITech.

Menu/submenu	Available options
4 RITECH	M E D I U M b L I G H T
	MEDIUM
	HEAVY
	OFF

RX-BUFFER SIZE

ThereceivebufferoptiononLevel2allowsyoutochangethe sizeoftheprinter’sinputbuffer.Alargereceivebuffersize allowsyoutoquicklytransferthecontentsofafilefromthe computer’s memory to the printer’s memory. The printer then prints the information from its own memory and frees up the computer for other tasks.

Ifyousetthebuffersizetoohigh,however,youmaygetan error message telling you to add memory.

When you press ) , the display reads as follows.

Menu/submenu		Available options
# CH P	XK	b S , P , o r O
		(S for ActionLaser 1500 only)

(Where X is the RX-BUFFER SIZE setting.)

SelecType 4-23