Epson 1000, 1500 Changing the RITech setting, 2.Press V until RITech appears on the display, To change your RITech setting, follow these steps:

Changing the RITech settingYou can select LIGHT, MEDIUM (the factory setting), HEAVY, orOFF.

RITechisineffectwhenyouselectLIGHT,MEDIUM,or HEAVY. Changing the setting to OFF turns off the RITech feature.

If your check pattern is too heavy, change the setting to LIGHT; if it is too light, change the setting to HEAVY; if you are printing gray shading or screen patterns, change the setting to OFF.

To change your RITech setting, follow these steps:1.Enter SelecType Level 2 by pressing theLEVEL 2 button.2.Press V until RITech appears on the display.

3.Press ) once and then press V until your desired setting (LIGHT, MEDIUM, HEAVY, or OFF) appears on the display.

4.Press ) twicetosetthenewsettingandprinta newcheck pattern using the new RITech setting.

5.Lookatthenewcheckpatterntoseeifitisimproved.Ifyou wishtosavethenewsetting,presstheEXIT buttontoexit SelecType.

Ifthepatternstillneedstobeimproved,youprobablyneedto change the print density setting. For a darker (HEAVY) RITech setting, make the print density lighter and vice versa. See “Adjusting print density” earlier in this chapter for instructions.

Note:

Do not change the pint density unless it is necessary. Doing so affects all text and graphics, so check the new setting by printing several pages.

Controlling Your Printer 1-21