Epson 1000, 1500 When to increase your printer’s memory, Selecting a memory chip set combination, These messages are described in more detail in Chapter

When to increase your printer’s memory

The printer displays one of these status messages when you have insufficient memory:

INSUFF MEMORY

PAGE BUFFER FULL

ADD MEMORY FOR CH X

These messages are described in more detail in Chapter 3.

You need to add memory if one of these messages appears and you are unable to resolve the memory problem as described in Chapter 3, “Troubleshooting,” or if the following situations require additional memory.

PUsing an optional identity card requires at least 1.5MB RAM.

Cl Using the SelecType Level 2 USER INDIVIDUAL setting requires at least 0.5MB RAM per channel. If you plan to use more than one interface channel for the ActionLaser 1000 or more than two interface channels for the ActionLaser 1500, you must add at least 0.5MB RAM.

Selecting a memory chip set combination

Before adding memory, you should determine the combination ofchipsetsyouneedtoobtainthedesiredtotalRAM.Keepin mind that the ActionLaser 1000 comes with 0.5MB RAM and the ActionLaser 1500 comes with 1.0MB RAM.

Options 5-35