OFFSET

These Level 1 options are found on the SYSTEM CONFIG. submenu.

T-OFFSET-You can use the T-OFFSET (top offset) option to make fine adjustments in the position of the printing on the page.Thesettingisindots;eachdotis1/300thofaninch (0.0846mm)soyoucanusethisoptiontoraiseorlowerthe printing on the page up to approximately 1/5th of an inch (5mm).Thefactorysettingis0.

Menu/submenu

Available options

4 T-OFFSET 0 b -64to +63

L-OFFSET-You can use the L-OFFSET (left offset) option to make fine adjustments in the position of the printing on the page.Thesettingisindots;eachdotis1/300thofaninch (0.0846 mm). With this option, you can move the printing on the page approximately 1/5th of an inch to the left (settings from -1 to -64) or to the right (settings from +1 to +63). The factory setting is 0.

Menu/submenu

Available options

4 L-OFFSET 0 b -64to +63

ORIENT.

This Level 1 option selects the direction in which the characters are printed on a page. The ORIENT. option is different for each printer emulation. See Appendixes B and C for information on the different printer emulations.

SelecType 4-21