Epson 1000, 1500 B-49, SCALE, 0 OFF, b OFF”, CENTER, LT (toXXX), b 0 (white) •, P E N + Q X . X X m m, A0, A1, A2, A3 or A4 (to XXX), ORIGIN : CORNER b C O R N E R

SCALE-Determines the reduction scale for reduced printing. You can print the data originally created for the paper size of the SCALE setting onto the paper size selected in the PAGE SIZE setting.

Menu/submenu		Available options
SCALE	0 OFF	b OFF”
		A0, A1, A2, A3 or A4 (to XXX)*
		LT (toXXX)*

•XXX is the setting that you set with PAGE SIZE option. You cannot set the SCALE option to same size as PAGE SIZE

ORIGIN-Sets the origin for the plotter-unit coordinate system; tothelowerleftcorner(CORNER)ortothecenterofthe hard-clip limit (CENTER).

Menu/submenu Available options

ORIGIN : CORNER b C O R N E R *CENTERPEN-Selectsthepenanditslinewidth.First, you can select the pen using a number, as indicated with the underline.

Menu/submenu	Available options
P E N + Q X . X X m m	b 0 (white) •

Then, you can select the pen line width (the number indicated with the underline) in increments of 0.05 mm, in a range from 0.05 mmto5.00mm.

Menu/submenu Available options

PEN X C 2.50mm b 0.05mm to 5.00mm

HP Emulation Mode B-49