Take out the imaging cartridge, shake it from side to side to distribute the toner, and then reinstall it. If the problem persists, replace the imaging cartridge as described at the end of this chapter.

Image is too dark

Use the DENSITY option in SelecType Level 2 for lighter print.

If the problem persists, replace the imaging cartridge as described at the end of this chapter.

Non-printed side of the page is dirty

Toner may have spilled in the paper feed path. Remove the imaging cartridge and then clean the paper path of the printer using a clean, soft, dry, lint-free cloth.

WARNING:

Q Opening the printer exposes the fuser, which is marked by a CAUTION HOT SURFACE label. Be careful not to touch the

fuser.

3-12 Troubleshooting