Epson 1000, 1500 Factory setting, LQ and FX Emulation Modes C-13

Default Settings

When the printer is initialized, the settings for the LQ and FX emulations are reset to the values shown in the table below.

	Item	I	Factory setting	I	Reset value
	Paper input		Standard paper		SelecType setting
			bin
	Paper size	I	A4		SelecType setting
	Page length		66 lines		Depends on the paper size
					and orientation settings
	Top of form		0.5 inch		SelecType setting
		I		I
	Left margin		Left edge of the		SelecType setting or left
			printable area		edge of the printable area
	Right margin		80 columns		Depends on the default right
			( 10 cpi)		margin set with SelecType
	Horizontal tab		Every eight		Every eight characters. (The
	settings		characters. (The		character width depends on
			character width is		the SelecType condensed
			10 cpi.)		print menu setting.)
	Vertical tab		Every 1/6 inch		Every 1/6 inch
	settings
I	VFU channel	I	Channel 0	I	Channel 0
	Character		10 cpi		Depends on the condensed
	spacing				print menu setting
	International		USA		SelecType setting
	character set
	Typeface	I	Courier		SelecType setting
	Proportional		Fixed		SelecType setting
	spacing
	Character table		On (ESC t1)		SelecType setting
	(ESC t)
	Condensed		Off		SelecType setting

LQ and FX Emulation Modes C-13