2. When the program displays the current configuration (if a n y ) , s e l e c t C o n f i g u r e v i d e o d i s p l a y .

3.Select ADI as your new driver. (The menu indicates that this is installed at interrupt 7A hex.)

4.Save the new configuration and return to the main menu.

Autodesk AutoCAD, Version 9.00

The AutoCAD drivers conform to the Autodesk Device Interface (ADI) for rendering and display drivers. Epson provides the following resolutions for AutoCAD 9.0:

640 x 480, 16-color graphics (R3V1480.EXE)

800 x 600, 16-color graphics (R3V1600.EXE)

1024 x 768, 16-color graphics (R3V1768.EXE).

Installing the Drivers

Use the instructions in your AutoCAD documentation to install the program on your hard disk. To install the drivers, follow the steps below:

1.Run the VGA Driver Setup program on your Utility 1 diskette to copy the AutoCAD 9.0 drivers to your hard disk. See “Using the VGA Driver Setup Program” on page A-4 for instructions.

When Setup asks for the name of the drive and directory to contain the driver files, erase the default name and enter the directory containing your AutoCAD 9.0 program files.

A-18 Using the VGA Utilities