Epson 386/25 CGA, CGA, CGA, column, column, to mono.), Monochrome, CGA 80 column, CGA 40 column, EGA, MCGA, VGA or, EGA,MCGA,VGA or other, EGA, MCGA,VGA or other

2.To change the display adapter setting, press Enter. The cursor block moves into the submenu and you see an additional menu on the right side:

CGA	4 0	c o l u m n
CGA	8 0	c o l u m n
Monochrome	80	column

EGA,MCGA,VGA or other

3.Press Enter to move the cursor block into this submenu and then use or to highlight the option that matches your display adapter type. If you are not sure which one to

choose, follow these guidelines:

❏If you are using the built-in VGA adapter or have installed a VGA, EGA, or MCGA card, select EGA, MCGA,VGA or other.

❏If you have a color graphics adapter (CGA) or a multi- mode graphics adapter (MGA) attached to an RGB (color) monitor, select CGA 80 column. (Also set the color/mono switch on the MGA card to color.)

❏If you have a composite color monitor, such as a color television with a video input, try selecting CGA 80 column. If the resulting resolution is poor, run Setup again and select CGA 40 column.

❏If you have a monochrome display adapter (MDA), an MGA, or a Hercules MGA attached to a monochrome monitor, choose Monochrome 80 column.

(Also set the color/mono switch on the MGA card to mono.)

❏If you have any other combination of monitor and display adapter card, select EGA, MCGA, VGA or o t he r. In addition, consult the documentation supplied with your display adapter card.

2-8Running the Setup Program