The table indicates the range of extended memory currently installed in your system. You see ON or OFF in the first area because your system comes with 2MB of memory and the extended memory area from 1MB to 2MB can be cached. If you installed additional memory, you see ON or OFF for each additional megabyte of memory you have installed. The shaded areas indicate ranges of memory that are not installed.

If your extended memory cache setting is correct, you can skip the rest of this section.

2.To change the setting, press Enter. The cursor block moves to Extended memory caching.

3.Press Enter again. The cursor block moves to the first range in the cache table. To change the setting for the first range from ON to OFF or vice versa, press Enter.

4.If you installed memory above 2MB, pressto move the cursor block to the next range. Press Enter to change the setting from ON to OFF, if necessary.

Then press or to move to the other ranges and press Enter, as necessary, to change the settings.

5.When you are finished, press to move the cursor block to the submenu.

6. Highlight * * * SAVE SETTING * * * and press Enter to return to the Setup menu.

Running the Setup Program

2-13